Product ID:S100B RA 330TX, CORROSION RESISTANT ALLOYS
MSDS Date:02/01/1989
FSC:3439
NIIN:00N031147
MSDS Number: BPGZW

HAYNES INTERNATIONAL INC

1020 WEST PARK AVE
KOKOMO, IN 46904-9013
US

Emergency Phone: 317-456-6894;800-424-9300(CHEMTREC)

Info Phone: 317-456-6625

Preparer: SAFETY DEPARTMENT

Cage: 80357

HAYNES INTERNATIONAL INC SUB OF CABOT CORP

9013 KOKOMO, IN 46904-9013 US

Telephone: 318-263-2002;765-456-6614

Cage: 80357

15 MG/M3 TDUST;5 MG/M3 RDUST.

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 0.4% MAX

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10 MG/M3 DUST

COLUMBIUM

CAS: 7440-03-1

Fraction By Weight: 0.2% MAX

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 19%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.5% MAX

OSHA PEL 0.1 MG/M3 FUME

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 39%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2.0% MAX

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 36%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 1.3%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 0.5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PROBS. METAL PWDRS/DUSTS MAY HAVE SIGNIFICANT

RTECS: 9999999ZZ

SPILLS & RELS TO ENVIRON(DISCHARGE TO STREAMS, SEWER

RTECS: 9999999ZZ

IMMED. IF SUCH POTNTL FOR SPILL/RELS EXISTS IF IS

RTECS: 9999999ZZ

SOURCES OF IGNITION.

RTECS: 9999999ZZ

W/TINTED LENS .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:UNDER NORMAL HNDLG & USE OF SOLID FORM
OF MATLS THERE ARE FEW HLTH HAZS. CUTTING, WELDING, MELTING,
GRINDING, ETC OF MATLS WILL PRDCE DUST, FUME/PARTICULATE WHICH MAY
PRESENT SIGNIFICANT HLTH HAZS. AC UTE:METAL DUST & FUMES OF
ELEMENTS IN ING SECTION CAN CAUSE IRRIT TO SKIN, EYE & MUC MEMBS,
ALLERGIC (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:GROUP 1(IARC); GROUP 2(NTP).
CHROMIUM:GROUP 1(IARC); GROUP 1(NTP).
Effects of Overexposure:HLTH HAZ:SKIN RXNS & DERM. INJURY TO EYES IS
GENERALLY RESULT OF PARTICULATE IRRIT/MECH INJURY TO CORNEA/CONJ BY
DUST. EXCESS INHAL CAN CAUSE RESP IRRIT, COUGH, BRONCH, CHILLS,
"FUME FEVER" & ASTHMA-L IKE SYMPS. CHRONIC:RESP DISEASE
W/SYMPSRANGING FROM SHORTNESS OF BREATH & COUGH TO PERM DISABILITY
DUE TO LOSS (SUPDAT)
Medical Cond Aggravated by Exposure:SKIN SENSITIVITY, PULM DISEASES,
NEUROLOGICAL DAMAGE/DISEASE, & CIRCULATORY, BLOOD & KIDNEY DISEASE.

First Aid:INHAL:IF BRTHG DFCLTY, REMOVE TO FRESH AIR. IF BRTHG HAS
STOPPED, PERFORM ARTF RESP & GET MD @ ONCE. INGEST:IF LG AMTS OF
DUST ARE INGESTED, SWALLOW LG QTYS OF H2O & ATTEMPT TO INDUCE VOMIT
IF CONSCIO US. GET MD @ ONCE. SKIN:TREAT CUTS & ABRASIONS BY STD
FIRST AID. REMOVE DUST BY WASHING W/SOAP & H2O. IF IRRIT PERSISTS
GET MD. EYES:FLUSH W/COPIOUS AMTS OF CLEAN H2O FOR @ LST 15 MINS.
IF (SUPDAT)

Flash Point:NON COMBUSTIBLE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:THESE ALLOYS ARE NONCOMBUSTIBLE. USE EXTINGUISHING
MEDIA APPROPRIATE TO SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. TO EXTING METAL PWDR FIRE USE DRY SAND, DRY GRAPHITE/OTHER CLASS
"D" FIRE EXTING PWDR.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ASSOCIATED W/THESE MATERIALS.

Spill Release Procedures:SOLID FORM:NO SPECIAL CLEAN-UP PROBS. DUST
FORM:USE VACUUM SYS UTILIZING HEPA SYS. MIN AIRBORNE GENERATION OF
DUST & AVOID CONTAM OF AIR & H2O. PROPERLY LBL ALL MATLS COLLECTED
IN WASTE CNTNR. IN SOLI D FORM MATLS POSE NO SPECIAL ENVIRON (ING
10)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PRODS MUST BE HNDLD ACCORDING TO SIZE,
SHAPE & QTY OF MATLS INVOLVED. SOLID METAL MAY REQ USE OF HOISTS,
CRANES, ETC.
Other Precautions:PWDRS SHLD BE MOVED/TRANSPORTED TO MIN SPILL/RELS
POTNTL. IN SOLID FORM MATLS POSE NO SPECIAL PROBS. STORE METAL &
METAL PWDR IN DRY AREA. DO NOT STORE ADJACENT TO MINERAL ACIDS.
FINE METAL PWDRS SHLD BE KEPT AWAY FROM FLAMES & (ING 13)

Respiratory Protection:USE NIOSH/MSHA APPROVED FUME RESPIRATOR OR AIR
SUPPLIED RESPIRATOR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT
KEEP EXPOSURE BELOW PEL.
Ventilation:LOCAL EXHAUST VENT SHOULD BE USED TO CONTROL EXPOSURE TO
AIRBORNE DUST & FUME WHENEVER POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG & WELDING FCSHLD (ING 14)
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS UNIFORMS,
DISPOSABLE COVERALLS, SAFETY SHOES, ETC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:OF LUNG FUNC, FIBROSIS/ SUBSEQUENT EFTS ON HEART.CNS
DEPRESS HAS BEEN IDENTIFIED W/EXCESS MN EXPOS. NI & CR METALS HAVE
BEEN LINKED TO RESP TRACT CANCERS. AL & FE HAVE BEEN INDICATED T O
CAUSE GI DISORDERS. FIRST AID PROC:IRRIT PERSISTS GET MD. CONT
LENSES SHLD NOT BE WORN IF WORKING W/METAL DUSTS & PWDR

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2550F,1399C
Spec Gravity:7.86
Solubility in Water:NONE
Appearance and Odor:SOLID, SILVER GRAY COLOR - NO COLOR.
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
CONT W/MINERAL ACIDS & OXIDIZING AGENTS MAY GENERATE H2O GAS WHICH IS
AN EXPLOSION HAZARD.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ELEMENTAL METALS & METAL OXIDES FROM
WELDING, CUTTING, GRINDING, MELTING OR DROSS HANDLING OPERATIONS.

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL I/A/W LOCAL, STATE OR
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.